Release Cords And Garage Doors: What You Need To Know

18 July 2016
 Categories: Construction & Contractors, Articles


It is recommended that every homeowner familiarize themselves with the release cord on their electric garage door system. Typically, most homeowners see this cord when they are performing garage door maintenance, such as cleaning the tracks or tightening bolts on the track. The release cord is a small rope with a red handle near the motor of the garage door opener. If you are unsure what the release cord is or what it is used for, read on to learn more about this important part of your garage door system.

What is a Garage Door Release Cord?

The garage door release cord is basically used to stop the electric garage door opener from opening your garage door. When the switch is pulled on, your garage door can be manually opened or closed.

When Would You Need to Use a Release Cord?

There are a number of reasons why you may want to bypass your electric garage opener and manually open or close your garage door. One of the most common reasons why you may wish to use the release cord and open your garage manually is because the power is out at your home. If you have an electric garage door opener and the power goes out, your opener will not work. If you park your car in the garage, you may have to get out to go to work, pick your kids up from school or to make it to an appointment on time. The release cord helps you accomplish this.

Another reason why you may need to use the release cord is because your electric garage opener is not functioning as it should. If your motor is broken, making funny sounds or is in need or repair, you may want to pull the release cord. This can help you open and close your garage door until you have time to call a garage door maintenance and repair company to fix your motor.

The last reason you may need to use the release cord, and the most important reason to familiarize yourself with it, is because of an emergency. If your home is on fire, you should not use your electric garage door opener. The heat could damage your wires and melt them. However, your garage may serve as a great escape route. Using the release cord can help you safely escape.

How Do You Use a Garage Door Release Cord?

If you have never used a garage door release cord, you may be unsure how to use yours. Follow these directions to release your garage door so that you can manually open the garage door:

  1. Make sure your garage door is completely down. Never attempt to pull the release cord when the garage door is up. This can cause the door to collapse.
  2. Pull the red handle on the release cord. You should be pulling the cord back toward the opener, rather than toward the garage door. The release cord is attached to a spring, so you should feel it move without pulling very hard. Continue pulling until the cord won't pull back any further.
  3. Attempt to lift your garage door. You should now be able to open and close the door.
  4. When you are ready to use your electronic opener again, you will once again have to put the door in the down position. This time, pull the release cord in the opposite direction, pulling it toward the garage door, rather than toward the electric opener. Continue this until you feel the spring snap back into place. Attempt to open the door to ensure it is connected again.

Your garage door release cord plays an important role in the operation of your electric garage door opener. It is important that every homeowner understands how it works in case of an emergency or power outage. It is also recommended that you examine the release cord while doing routine maintenance. Pests may eat the rope or it can deteriorate. If this should occur, it is important to replace the release cord so that it is functional when you need it to be. A professional garage door repair company can assist you with this task. Follow this website link to contact a garage door company.